[Vijay Kumar] is a professor at the University of Pennsylvania and the director of the GRASP lab where research centering around autonomous quadcopters is being met with great success. If you were intrigued by the video demonstrations seen over the last few years, you won’t want to miss the TED talk [Dr. Kumar] recently gave [...]

read more from this topic.....

[Lauszus] really put together an impressive self balancing robot platform. It is virtually motionless when balancing in place, and that stability is never lost even when motoring across the room. Part of the success behind this build is the use of quality components. He’s got a really nice set of motors with built-in encoders which [...]

read more from this topic.....

If you weren’t already a big fan of quadrotors by this point, we’re pretty sure the video below will get you on the bandwagon in no time flat. The video was debuted this past week at the TED2012 conference, giving [Daniel Mellinger, Alex Kushleyev, and Vijay Kumar] from the University of Pennsylvania GRASP Lab, a chance [...]

read more from this topic.....

[Kevin] wrote in to tell us about the robotics development platform he’s been working on for the last few years. He calls his device the DyIO, and looks like an extremely easy way to get a robot up and running quickly. Because the DyIO stands for Dynamic Input & Output, [Kevin] thought it was important [...]

read more from this topic.....

[Kevin] undertook a robot build partly for his own enjoyment, but also to include his kids in the action. He acquired a cheap toy and packed it full of programmable goodness. The starting point was a $15 toy called Rad 2.0. It’s a great starting point as it already included some motorized parts, and takes [...]

read more from this topic.....

It’s difficult to contain our excitement for this tiny quadcopter project called the Picopter. [Frank] managed to pull together an impressive collection of features when developing the project. First off, the quadcopter itself uses all-PCB construction. Even the supports for the motors are PCBs with keyed slots to mate perpendicular to the main control board, [...]

read more from this topic.....

Straight from the Aerospace Controls Laboratory comes a variable-pitch quadrocopter designed by [Mark Cutler] and [Jonathan P. Howe]. While real, full-sized helicopters always have variable pitch rotors, changing the pitch of the blades on remote control aircraft is a fairly uncommon modification. When it’s done right, though, being able to easily change the thrust direction of a [...]

read more from this topic.....

As a kid, metal detectors seemed like great fun. Every commercial I saw beckoned with tales of buried treasure “right in my own back yard” – a bounty hard for any kid to pass up. In reality, the process was both time consuming and tedious, with little reward to be had. [Gareth] liked the idea [...]

read more from this topic.....

The Swiss plan to clean up the near-space environment. They just announced a debris removal device which they plan to launch in three to five years. The first goal of the program is to scoop up two satellites. Both of them are Swiss owned, but there’s something very James Bond like that pops into our heads [...]

read more from this topic.....

If you’ve ever wanted your own self-driving car, this is your chance. [Sebastian Thrun], co-lecturer (along with the great [Peter Norvig]) of the Stanford AI class is opening up a new class that will teach everyone who enrolls how to program a self-driving car in seven weeks. The robotic car class is being taught alongside a [...]

read more from this topic.....

What’s better than one amazingly acrobatic quadcopter? How about a swarm of acrobatic micro-quadcopters? It’s not a rhetorical question, but an experimental reality. A team at the University of Pennsylvania are showing off their latest round of hovering robots which can move in formation and alter their orientation as a swarm. You may remember us [...]

read more from this topic.....

After the terrible tragedy in Fukushima, the cleanup and damage assessment has begun. A robot operator, known only as [S.H.] has decided to write a blog about their efforts.  As pictured above, they are using [iRobot] models, including the [510 Packbot], and the [710 Warrior]. Since cleanup efforts started, [S.H.] was posting on his or [...]

read more from this topic.....

Even though abstract expressionism died out several decades ago, robots are still chugging along dripping nihilistic pigment onto a cold, uncaring canvas. [Liat] and [Assaf] created a robot named The Originals Factory to create paintings in the style of abstract expressionism, a style of painting that is arguably best represented by [Jackson Pollock] and his ‘drip paintings.’ [...]

read more from this topic.....

[Pythagoras] is a delta robot built originally using RC servos. Humbly, [Aaron] “concedes” that the first version of his delta robot using hobby servos was easy to build. As anyone who has built any kind of robot knows though, there is definitely a lot of work involved in even the simplest robot. Coordinating three axes [...]

read more from this topic.....

Meet Boxie. He’s a robot videographer with levels of interaction we haven’t seen outside an episode of Dora the Explorer. The project was conceived by [Alex] as his MIT thesis project to see if robots can use humans to make themselves more useful. All we know is Boxie is freaking adorable, as evidenced by this video. The [...]

read more from this topic.....

This is Chippu, a robot that [Achu] has been working on for some time. His most recent addition was to give the robot the ability to respond to voice commands. This is accomplished using a variation of the open source Continuous Speech Recognition package called Julius. The package depends on two main parts, a set [...]

read more from this topic.....

[Mike Li] is showing of his stair climbing robot. It’s a bot that cruises around on a pair of tank treads, but some interesting modifications gave him the traction needed to ascend a flight of stairs without slipping backward. The image above shows this process in great detail. You can see the unaltered treads leaving [...]

read more from this topic.....

[Eric Gregori] recently spent some time messing around with a Hexbug Spider, and wrote in to share some modifications he made to the toy. In its unaltered form the robot can be controlled remotely, and while it’s fun to play with, the excitement is short lived. Using a TI MSP430 along with a small motor [...]

read more from this topic.....

The Chief Knock-a-Homer robot is [Psycho Freaky's] shout out to The Simpsons. The robot design appeared in an episode where [Homer] built [Bart] a fighting robot. Since he’s not robot builder, [Homer] actually climbed inside the shell and dished out sweet vengeance while suffering some severe injuries at the same time. But [Psycho] has the skills necessary to make this [...]

read more from this topic.....

[DJ Sures] has been pulling all-nighters lately to get his AR Drone Parrot build off the ground. Now that it’s up and flying around, he managed to get it to follow objects around the room using on board cameras. For the build, [DJ Sures] used the AR Drone ’flying video game’ quadrocopter. This toy has two on [...]

read more from this topic.....

After taking the Stanford Machine Learning class offered over the Internet last year, [David Singleton] thought he could build something really cool. We have to admit that he nailed it with his neural network controlled car. There’s not much to the build; it’s just an Android phone, an Arduino and a toy car. The machine [...]

read more from this topic.....

Want to monitor how much a wheel has turned in your project? Then you need a rotary encoder! Here’s a way to add rotary encoding without changing the mounting method of your wheels (translated). [Jorge] added it as a way to improve the functionality of this line-following robot. It uses a paper encoder wheel which is [...]

read more from this topic.....

[Marc Cryan] built this little bugger which he calls Wendell the Robot. But what good is an animatronic piece like this unless you do something fun with it? That’s why you can catch the movements matching [Michael Jackson's] choreography from the music video Thriller in the clip after the break. This is a ground-up build [...]

read more from this topic.....

Tweet Receiving, that is. This Ewok model, named “Ewen the Cheerlight,” is able to rotate its head left and right as well as show expressions. The most interesting feature of this hack, however, is that the little Ewok actually wakes up each time one tweets a “colour” to @cheerlights and lets it’s owner [Joel] know [...]

read more from this topic.....

Robots on four wheels are fun on their own merits, but one thing that most lack is the ability to see through walls.  With it’s onboard radar system, this bot is equipped to see objects that a person couldn’t normally detect on the other side of the wall. Although some of the more “nuts and [...]

read more from this topic.....

For a number of children born of geek parents, the WowWee Tribot is sure to make an appearance underneath a Christmas tree this year. By New Year’s, though, this toy will surely make its way to the back of a closet to sit unused until spring cleaning. It’s a shame to let such an interesting [...]

read more from this topic.....

[Achu Wilson] was watching TV when he saw an ad for Volkswagen’s latest Passat, which happens to come equipped with a park assist mode. This essentially allows the car to park itself with little to no user interaction. While these systems come as a pricey add-on option, he figured he could build something similar in [...]

read more from this topic.....

This is [James'] latest android build, a set of legs that use gyroscopes for balance. He started off by planning the build with some LEGO pieces to get an idea of how each foot and leg joint would fit together. This let him achieve one of his goals. From the start he wanted to create [...]

read more from this topic.....

Once again, we’re wowed over [Zenta]‘s robotic skill. A few months ago, [Zenta] posted a video of his MorpHex hexapod spherebot that left us awed. After a few long months, more bits of MorpHex have made it onto the chassis. [Zenta] says his project isn’t done but it’s still enough to knock our socks off. [...]

read more from this topic.....

[DJ Sures] just can’t help himself from tinkering with robot toys built in the 80s. This time, he got his hands on an Omnibot-2000 (not to be confused with his other Omnibot hack), and updated it for the 21st century. After its obligatory run through the dishwasher, the robot was fitted with two heavy duty [...]

read more from this topic.....